EMG HZ vs 81,85, ... Опции

[Иван Булочкин (гость)]

Чувки, давно и безутешно ищу эту схему.. помогите плиз

[,,,=^o^=,,, (гость)]

EMG-HZ H1 Dual-coil Humbuckers H1 and H1A power humbuckers from EMG combine traditional adjustable polepieces with overwound coils at 13.6K ohms. The H1 has a ceramic magnet for a brighter tone than a standard humbucker, and the H1A's Alnico 5 magnet gives warm lows and midrange, with less top end. EMG-HZ H2 Dual-coil Humbuckers H2 and H2A passive pickups from EMG feature adjustable polepieces with vintage-wound coils at 8.4K ohms. A beefed-up magnet gives an extra-full sound. The H2 has a ceramic magnet for brightness, and the H2A has an Alnico 5 magnet for fat low end. EMG-HZ H3 Dual-coil Humbuckers H3 and H3A passive pickups from EMG are power humbuckers designed for enhanced brightness. They feature two overwound coils at 13.6K ohms, with stud polepieces under a solid cover. The H3 has a ceramic magnet for enhanced highs, and the H3A has an Alnico 5 magnet for more punch and warmth. EMG-HZ H4 Dual-coil Humbuckers EMG's new H4 is an overwound powerhouse designed for lead guitar — delivering output like EMG's sledgehammer active systems, but with no batteries required. H4 and H4A passive pickups from EMG deliver raw high-output power from dual bar polepieces under a solid cover. Each pickup is overwound for high output at 13.6K ohms. The H4 has a ceramic magnet for brightness, and the H4A has an Alnico 5 magnet to emphasize low-end and midrange. EMG-HZ S1 Single-coil Pickup The S1 is a high-output (11.0K ohms) overwound stacked pickup for direct replacement in a Strat or similar guitar. It features Alnico 5 polepieces with 2-1/8" spread. The S1 is designed with less high frequency response, to complement high output dual-coil pickups in the same guitar. A great choice for heavy metal. All EMG-HZ "single-coil" pickups have either a stacked or side-by-side dual coil design, to fit a standard single-coil pickup cavity. Screws, springs and wiring instructions are included. EMG-HZ S2 Single-coil Pickup The S2 is a stacked pickup for direct replacement in a Strat or similar guitar. It features Alnico 5 polepieces with 2-1/8" spread. The S2 gives a true traditional single-coil tone — bright, clear and quiet, at 6.6K ohms. All EMG-HZ "single-coil" pickups have either a stacked or side-by-side dual coil design, to fit a standard single-coil pickup cavity. Screws, springs and wiring instructions are included. EMG-HZ S3 Single-coil Pickup The S3 is a high-output (11.0K ohms) overwound stacked pickup for direct replacement in a Strat or similar guitar. It features Alnico 5 polepieces with 2-1/8" spread, under a solid cover. The S3 is designed with less high frequency response, to complement high output dual-coil pickups in the same guitar. A great choice for heavy metal. EMG-HZ S4 Single-coil Pickup The S4 has a "rail" design with side-by-side coils (6.7K ohms) and a ceramic magnet. It's not overwound like most rail pickups, for beefier low-end and midrange, plus the crisp highs of a traditional single-coil pickup. Great for heavy rock.