Комбы Fender made in CHINA... Опции

[Иван Булочкин (гость)]

Чувки, давно и безутешно ищу эту схему.. помогите плиз

[NeCaster]

ЕТМ!!! Мужчины, когда покупаете гитары/аппаратуру, вы что ее БЕЗ ИНСТРУКЦИИ БЕРЕТЕ?!?! Или вам нужен спецчеловек, открывающий инструкцию на нужной странице и оглашающий ответ на каждый ваш вопрос?!?! Ладно, проехали... Стр. 13 инструкции по употреблению VOX AD15/30/50VT гласит: ADJUSTING THE NOISE REDUCTION Here’s how to adjust the noise reduction HINT: When using a high-gain amp model such as “NUMETAL” or “US HIGAIN,” we recommend that you use noise reduction, since more gain means more noise! NOTE: The noise reduction setting is part of each program. In Preset and Channel Select modes, your setting will be lost if you switch to a different program or to Manual mode (or turn off the power) without storing your edited program .rst. 1. Press the BYPASS button to make the BYPASS LED light. 2. Hold down the TAP button and turn the EDIT 1 knob to adjust the noise reduction sensitivity. Turning the knob toward the right will produce greater noise reduction (less noise). If you turn the knob all the way to the left, noise reduction will be off, and won’t do anything (more noise). NOTE: Depending on the guitar you’re using, excessively high noise reduction settings may cause notes to be cut off in an unwanted manner! 3. If you want to use effects, press the BYPASS button to make the BYPASS LED go dark and the effect(s) will be heard.